100% custom made
Service & Quality
100% Comfort
100% custom made
Service & Quality
100% Comfort
100% custom made
Service & quality
100% Comfort
€409.00
The original 1-way driver from Audinc offers a very balanced sound. Every tone is exactly where it belongs. A set of in-ears with 1-way driver technology can be the perfect first step to get you started in the world of professional in-ears
1-way driver (Balanced Armature)
Sound Signature: Balanced
Sensitivity at 1mW: 118dB SPL
Impedance at 1 kHz: 22 Ohm
Frequency range: 20Hz – 20kHz
Maximum output: 127dB SPL
THD at 94dB SPL: 0.2%
THD at 100dB SPL: 0.2%
These 2-way headphones combine crystal clear treble and pristine bass with its high-definition drivers.
These professional earphones are individually and custom made from acrylic LPH and finished with a decorative faceplate. Made of perfectly fitting light polymer (acrylic plastic). This handset has a 2-pin interchangeable cable and can therefore be optionally equipped with other cables or the wireless neckband.
2-way driver (balanced)
Sound Signature: Bass heavy
Sensitivity at 1mW: 116dB SPL
Impedance at 1 kHz: 30 ohms
Frequency range: 20Hz – 25kHz
Maximum output: 125dB SPL
THD at 94dB SPL: 0.1%
THD at 100dB SPL: 0.3%
In the 3-way receiver, three individually selected high-definition drivers provide overwhelmingly perfect sound.
A slight midrange reduction and combined with clean transmission of details up to the highest frequency ranges – these are the Audinc 3-way in-ears. Three high-definition drivers deliver the overwhelmingly perfect sound. Here too you have the option to choose a more balanced sound setup and enjoy any sound level in a balanced way. Or you opt for a powerful, very accurate and dry bass. Then you have the choice between the bass-heavy variant and the ultimate bass boost. Our 3-way sound design gives you the sound world you want to lose yourself in.
These professional in-ears are individually and custom made from acrylic LPH and finished with a decorative faceplate. Made of perfectly fitting light polymer (acrylic plastic). These in-earsts have a 2-pin interchangeable cable and can therefore optionally be equipped with other cables or the wireless neckband
3-way driver
Sound Signature: Balanced
Sensitivity at 1mW: 113dB SPL
Impedance at 1 kHz: 11 ohms
Frequency range: 15Hz – 28kHz
Maximum output: 131dB SPL
THD at 94dB SPL: 0.1%
THD at 100dB SPL: 0.2%
Our highlight: Audinc 4-way driver technology. With their four high-definition drivers, the 4-way in-ears bring full power into your ear canal, exactly the way you want it. Do you like filigree, clear and precise? Then our hi-fi sound design ensures a true-to-life sound image with an extremely high resolution and the finest resolution in the mid- and high-frequency spectrum. Are you more of the relaxed, balanced type? Then choose our balanced setup for your in-ears. And if you really want to blast it and prefer the bass, you can choose between the subtle bass-heavy or the ultimate bass-boost sound design.
These professional earphones are individually and custom made from acrylic LPH and finished with a decorative faceplate. Made of perfectly fitting light polymer (acrylic plastic). This handset has a 2-pin interchangeable cable and can therefore be optionally equipped with other cables or the wireless neckband.
4-way driver (balanced armature)
Sound Signature: Bass heavy
Sensitivity at 1mW: 120dB SPL
Impedance at 1 kHz: 20 ohms
Frequency range: 10Hz – 35kHz
Maximum output: 130dB SPL
THD at 94dB SPL: 0.1%
THD at 100dB SPL: 0.1%
The 6-way driver from Audinc delivers a subtly amplified bass and is characterized by a particularly natural stereo image. Musical midtones give the whole a beautiful depth.
BASS STRONG
This sound signature adds just that little bit to the bass to experience dynamics spectacularly, intensively and emotionally. The bass sets the tone here, but without pushing away the clear high and mid tones. Whether it’s R’n’B, hip-hop or electro, the beats dominate here. The performance of the bass drivers is supported in such a way that the pressure is pleasantly palpable, but not overpowering. Do you play bass, are you a DJ, do you love your beatmaker or blow off steam on the drums? Then this could be the sound signature you feel comfortable with.
These professional in-ears are individually and custom made from acrylic LPH and finished with a decorative faceplate. Made of perfectly fitting light polymer (acrylic plastic). This handset has a 2-pin interchangeable cable and can therefore be optionally fitted with other cables or the wireless neckband
About a year ago, I bought custom sleeves for my Shure SE 215. The tailoring process went fast, friendly and they gave all the advice I need. The delivery was in time.
And now, after a year of use, I’m still happy. The fitting is still great and the ear plugs are easy to take out of my ears. The only minor disadvantage is that the sleeves sometimes feel a bit loose.
I would definitely recommend this product!
Great product. I used to have earplugs with speakers that were coming out of my ears (regular). This, however, is much better…no more pressure and all the benefits of custom made earplugs.
I was disappointing when I bought my In-ears from Shure. Thanks to Audinc and their sleeves I can still use them. They have a good filter and I’m able to create music.