Manual custom in-ears

Places

• Make sure hands and IEMs are clean.

• Recognize left and right: Ring cable connector red = right

• Ring cable connector blue = left

• Additional marking: R (right) and L (left) on the IEM.

• Gently insert the tip into the ear canal and slowly rotate the IEM backwards.

• If necessary, use your other hand to pull the ear up so that the ear canal opens.

• Gently press the IEM until it is firm and comfortable.

👉 For a demonstration video on how to insert, clean or remove the cable: watch our YouTube channel.

Remove

• Gently rotate the IEM forward.
• Slowly pull outward.
• Important: never pull or adjust through the cable.

Cleaning & maintenance

• After each use, check the sound channels for earwax or dirt.
• If necessary, remove it with the wax hook provided.
• Clean silicone tips and cable with a damp cloth or sterile tissue.
• Never immerse the IEMs or cable in liquid.

Cable

• Cable passes over the ear and behind the head.
• Secure the cable with the slider.
• Cable is fixed or interchangeable (depending on model).
• Disconnect only when replacement is necessary.
• Never pull on the cable to remove the IEMs. This may damage connectors and internal components.

Warnings

• Intended for in-ear use only.
• Improper use or poor cleaning reduces performance.
• Keep out of reach of small children**(choking hazard**).
• Avoid contact with sharp objects, liquids and chemicals.
• Check regularly for wear or damage.
• Stop use if you find that the IEMs are affecting your safety or concentration.
• Avoid sudden or too rapid insertion/removal (this can cause damage to the ear).